Subaru 2007 Tribeca Bedienungsanleitung PDF herunterladen (Seite 108)

Keys and doors 2-11

2

– CONTINUED –

crease. Replace the battery as soon as

possible.

To replace the battery:

0

1. Open the transmitter case using a flat-

head screwdriver.

2. Remove the old battery from the hold-

er.

1) Negative (–) side facing up

3. Replace with a new battery (Type

CR2025 or equivalent) making sure to in-

stall the new battery with the negative (–)

side facing up.

4. Refit the removed half of the transmit-

ter case.

After the battery is replaced, the trans-

mitter must be synchronized with the

keyless entry system’s control unit.

Press either the “ ” or “ ” button

six times to synchronize the unit.

 Replacing lost transmitters

If you lose a transmitter or want to pur-

chase additional transmitters (up to four

can be programmed), you should re-pro-

gram all of your transmitters for security

reasons. It is recommended that you have

your dealer program all of your transmit-

ters into your system.

T Programming the transmitters

The keyless entry system is equipped with

a special code learning feature that allows

you to program new transmitter codes into

the system or to delete old ones. The sys-

tem can learn up to four unique transmitter

codes. The four transmitter codes may be

the same or different.

Programming transmitter codes into

system:

Bag containing transmitter

200715

200716

1

200717

200718

A3120BE-B.book 11 ページ２００６年５月３０日　火曜日　午前９時３２分

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 400 401

Kommentare zu diesen Handbüchern

Keine Kommentare