Subaru 2007 Tribeca Bedienungsanleitung PDF herunterladen (Seite 129)

3-6 Instruments and controls

 Canceling the function for

meter needle/gauge move-

ment and combination meter

sequential illumination upon

turning on the ignition switch

It is possible to activate or deactivate the

movement of the meter needles and

gauges and sequential illumination of the

combination meter that takes place when

the ignition switch is turned to the “ON” po-

sition.

Turn the ignition switch to the “ACC” posi-

tion. With the A trip meter indication se-

lected, briefly press the trip knob twice.

You can now establish the activated/deac-

tivated setting for movement of the meter

needles and gauges when the ignition

switch is turned to the “ON” position. To

change the current setting, press the trip

knob for at least two seconds.

: Activated

: Deactivated

With the function deactivated, the combi-

nation meter illuminates as follows:

1. Warning lights, indicator lights, meter

rims, meter needles, odometer, trip meter,

and gauge back lights illuminate.

2. Meter and gauge dials illuminate.

3. Regular illumination (for driving) be-

gins.

Briefly press the trip knob again. You can

now establish the activated/deactivated

setting for sequential illumination of the

combination meter when the ignition

switch is turned to the “ON” position. To

change the current setting, press the trip

knob for at least two seconds.

: Activated

: Deactivated

Briefly press the knob to return to the A trip

meter indication.

If you turn the ignition switch to the

“LOCK” position, turn the ignition switch to

the “ON” position, or open and close the

driver’s door during the setting procedure,

the new setting will be canceled.

Also, if you do not press the trip knob for a

period of 10 seconds, the new setting will

be canceled.

NOTE

y It is not possible to cancel sequential

illumination of the combination meter

while sequential illumination is actual-

ly taking place. Cancel sequential illu-

mination when regular illumination (for

driving) has begun.

y When you open the driver’s door

with the ignition switch in the “LOCK”

position, the meters’ needles and rims

are lit. The illumination stops working

when you shut the driver’s door or au-

tomatically after 30 seconds.

300185

300543

A3120BE-B.book 6 ページ２００６年５月３０日　火曜日　午前９時３２分

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 400 401

Kommentare zu diesen Handbüchern

Keine Kommentare