Subaru 2007 Tribeca Bedienungsanleitung PDF herunterladen (Seite 253)

7-24 Starting and operating

Vehicle Dynamics Control

system

In the event of wheelspin and/or skidding

on a slippery road surface and/or during

cornering and/or an evasive maneuver,

the Vehicle Dynamics Control system ad-

justs the engine’s output and the wheels’

respective braking forces to help maintain

traction and directional control.

y Traction Control Function

The traction control function is designed to

prevent spinning of the driving wheels on

slippery road surfaces, thereby helping to

maintain traction and directional control.

Activation of this function is shown by

steady illumination of the Vehicle Dynam-

ics Control operation indicator light.

y Skid Suppression Function

The skid suppression function is designed

to help maintain directional stability by

suppressing the wheels’ tendency to slide

sideways during steering operations. Acti-

vation of this function is shown by flashing

of the Vehicle Dynamics Control operation

indicator light.

N

O

TE

y Slight twitching of the brake pedal

Always use the utmost care in driv-

ing – overconfidence because you

are driving with a Vehicle Dynamics

Control system equipped vehicle

could easily lead to a serious acci-

dent.

y Even if your vehicle is equipped

with Vehicle Dynamics Control,

winter tires or snow chains

should be used when driving on

snow-covered or icy roads; in ad-

dition, vehicle speed should be re-

duced considerably. Simply hav-

ing a Vehicle Dynamics Control

system does not guarantee that

the vehicle will be able to avoid

accidents in any situation.

y Activation of the Vehicle Dynam-

ics Control system is an indica-

tion that the road being travelled

on has a slippery surface; since

having Vehicle Dynamics Control

is no guarantee that full vehicle

control will be maintained at all

times and under all conditions, its

activation should be seen as a

sign that the speed of the vehicle

should be reduced considerably.

y Whenever suspension compo-

nents, steering components, or an

axle are removed from a vehicle

equipped with Vehicle Dynamics

Control, have an authorized SUB-

ARU dealer perform an inspection

of that system.

y The following precautions should

be observed in order to ensure

that the Vehicle Dynamics Control

system is operating properly:

– All four wheels should be fitted

with tires of the same size, type,

and brand. Furthermore, the

amount of wear should be the

same for all four tires.

– Keep the tire pressure at the

proper level as shown on the

vehicle placard attached to the

driver’s side door pillar.

A3120BE-B.book 24 ページ２００６年５月３０日　火曜日　午前９時３２分

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 400 401

Kommentare zu diesen Handbüchern

Keine Kommentare