Subaru 2007 Tribeca Bedienungsanleitung PDF herunterladen (Seite 348)

Maintenance and service 11-31

11

– CONTINUED –

Wheel nuts tightening torque for alumi-

num wheel:

74 to 89 lbf·ft (100 to 120 N·m, 10 to 12

kgf·m)

This torque is equivalent to applying ap-

proximately 88 to 110 lbs (40 to 50 kg) at

the top of the wheel nut wrench.

y Never apply oil to the threaded parts,

wheel nuts, or tapered surface of the

wheel.

y Never let the wheel rub against sharp

protrusions or curbs.

y Be sure to fit tire chains on uniformly

and completely around the tire, otherwise

the chains may scratch the wheel.

y When wheel nuts, balance weights, or

the center cap is replaced, be sure to re-

place them with genuine SUBARU parts

designed for aluminum wheels.

Chrome plated wheels

(if equipped)

1) The length of the wheel nut wrench

y When any of the wheels are removed

and replaced for tire rotation or to change

a flat tire, always check the tightness of

the wheel nuts after driving approximately

600 miles (1,000 km). If any nut is loose,

tighten it to the following specified torque.

A tightening sequence specification for

the wheel nuts can be found in the “Flat

tires” in chapter 9.

1

900292

There are 2 types of wheel nut

wrenches that apply to different

lengths.

For an aluminum wheel vehicle, the

11.2-inch (285 mm) wheel nut

wrench is equipped as a mainte-

nance tool. And for a chrome plated

wheel vehicle, the 13.2-inch (335

mm) wheel nut wrench is equipped

as well. Always use a wheel nut

wrench for a chrome plated wheel. If

you use a wrench for an aluminum

wheel, you cannot tighten it to the

specified torque.

A3120BE-B.book 31 ページ２００６年５月３０日　火曜日　午前９時３２分

1 2 ... 343 344 345 346 347 348 349 350 351 352 353 ... 400 401

Kommentare zu diesen Handbüchern

Keine Kommentare