Subaru 2007 Tribeca Bedienungsanleitung PDF herunterladen (Seite 298)

In case of emergency 9-9

9

– CONTINUED –

head engages firmly into the jack-up point.

10.Insert the jack handle into the jack-

screw, and turn the handle until the tire

clears the ground. Do not raise the vehicle

higher than necessary.

11.Remove the wheel nuts and the flat

tire.

12.Before putting the spare tire on, clean

the mounting surface of the wheel and

hub with a cloth.

13.Put on the spare tire. Replace the

wheel nuts. Tighten them by hand.

14.Turn the jack handle counterclockwise

to lower the vehicle.

900215

900009

600162

Do not use oil or grease on the

wheel studs or nuts when the spare

tire is installed. This could cause the

nuts to become loose and lead to an

accident.

There are 2 types of wheel nut

wrenches that apply to different

lengths.

For an aluminum wheel vehicle, the

11.2-inch (285 mm) wheel nut

wrench is equipped as a mainte-

nance tool. And for a chrome plated

wheel vehicle, the 13.2-inch (335

mm) wheel nut wrench is equipped

as well. Confirm the equipped wheel

nut wrench type when you replace a

tire. If the wheel nut wrench is the

different type, it cannot be tightened

to the specified torque.

A3120BE-B.book 9 ページ２００６年５月３０日　火曜日　午前９時３２分

1 2 ... 293 294 295 296 297 298 299 300 301 302 303 ... 400 401

Kommentare zu diesen Handbüchern

Keine Kommentare