Subaru 2007 Tribeca Bedienungsanleitung PDF herunterladen (Seite 46)

Seat, seatbelt and SRS airbags 1-21

1

– CONTINUED –

V Adjusting the front seat shoulder

belt anchor height

The shoulder belt anchor height should be

adjusted to the position best suited for the

driver/front passenger. To lower the an-

chor height, push the release button and

slide the anchor down. To raise the an-

chor height, slide the anchor up. Pull down

on the anchor to make sure that it is

locked in place.

Always adjust the anchor height so that

the shoulder belt passes over the middle

of the shoulder without touching the neck.

V Unfastening the seatbelt

Push the button on the buckle.

Before closing the door, make sure that

the belts are retracted properly to avoid

catching the belt webbing in the door.

T Rear seatbelts (5-seater models)/

Second-row seatbelts (7-seater

models) – excluding center seatbelt

1. Sit well back in the seat.

2. Pick up the tongue plate and pull the

belt out slowly. Do not let it get twisted. If

the belt stops before reaching the buckle,

return the belt slightly and pull it out more

slowly. If the belt still cannot be unlocked,

let the belt retract slightly after giving a

strong pull on it, then pull it out slowly

again.

3. Insert the tongue plate into the buckle

until you hear a click.

100374

When wearing the seatbelts, make

sure the shoulder portion of the

webbing does not pass over your

neck. If it does, adjust the seatbelt

anchor to a lower position. Placing

the shoulder belt over the neck may

result in neck injury during sudden

braking or in a collision.

100105

100102

A3120BE-B.book 21 ページ２００６年５月３０日　火曜日　午前９時３２分

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 400 401

Kommentare zu diesen Handbüchern

Keine Kommentare