Subaru 2007 Tribeca Bedienungsanleitung PDF herunterladen (Seite 60)

Seat, seatbelt and SRS airbags 1-35

1

– CONTINUED –

T Installing a rearward facing child re-

straint

1. Slide the seat or seat pair to its rear-

most position.

2. Adjust the seatback to the upright posi-

tion.

3. Place the child restraint system in the

rear seating position.

4. Run the lap and shoulder belt through

or around the child restraint system follow-

ing the instructions provided by its manu-

facturer.

5. Insert the tongue plate into the buckle

until you hear a click.

6. Take up the slack in the lap belt.

7. Pull out the seatbelt fully from the re-

tractor to change the retractor over from

the Emergency Locking Retractor (ELR)

to the Automatic Locking Retractor (ALR)

function. Then, allow the belt to rewind

into the retractor. As the belt is rewinding,

clicks will be heard which indicate the re-

tractor functions as ALR.

8. Push and pull the child restraint system

forward and from side to side to check if it

is firmly secured.

Sometimes a child restraint can be more

firmly secured by pushing it down into the

seat cushion and then tightening the seat-

belt.

9. Pull at the shoulder portion of the belt

to confirm that it cannot be pulled out (ALR

properly functioning).

100503

100504 100505

A3120BE-B.book 35 ページ２００６年５月３０日　火曜日　午前９時３２分

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 400 401

Kommentare zu diesen Handbüchern

Keine Kommentare